Heat exchanger for swimming pools

With this energy-efficient pool heater, you can enjoy your pool even in spring and autumn. From an air temperature of 12 degrees, the modern heat exchanger can convert energy from the air into heating power to warm the pool water. The heat pump is easy to install and operate. The mains switch with water sensor and the overload protection at cold temperatures ensure safe and trouble-free operation. The heater can be used for practically all above-ground pools up to 30 cubic metres in volume with an efficient filter system. Extend the swimming season thanks to this Flowclear heat pump with excellent efficiency!

• Pool heating with air/water heat pump
• Ensures pleasantly warm bathing water even in autumn and spring
• Suitable for pools up to 30'000 litres
• Operates in combination with a sand or cartridge filter pump
• Achievable water temperature depends on air temperature and pool size
• Corrosion-resistant titanium heat exchanger with excellent efficiency
• Automatic switch-off below 12 degrees air temperature
• Safety thanks to mains switch with water sensor
• Easy to install and operate

Technical data:

• Colour: according to illustration
• Operating voltage: 220 - 240 V
• Max. Power consumption: 1200 W
• Heating capacity (at 26 °C): 4400 W
• Efficiency COP: 4.8
• Operating temperature: 12 °C
• Refrigerant: R32 (difluoromethane)
• Max. Pool size: 30'000 litres
• Min. capacity filter system: 2'006 litres/hour
• Protection class: IPX4

Scope of delivery:

• 1 x heat pump
• 1 x 1.5 m hose (32 mm diameter)
• 1 x adapter set for 32 mm connections
• 1 x adapter set for 38 mm connections